Make Your Selection: STYLPRO Wavelength LED Face Mask

Give your beauty routine a boost with the StylPro Wavelength LED Face Mask, an innovative device that uses red (633nm) and blue (830nm) LED lights to emit specific wavelengths of light onto the skin. Featuring four modes, this hands-free, wearable device is the perfect way to target your complexion needs with just one 10-minute session, all from the comfort of your own home.
Proven results
In a consumer perception survey of 37 subjects, after using the device for 3 weeks:

• 81% agreed that their skin looked more radiant.

In a consumer perception survey of 37 subjects, after using the device for 6 weeks:

• 89% agreed they saw visible improvements to their skin.
• 86% agreed they would recommend this product to others.
• 81% agreed they saw visible improvements to skin texture.
• 76% agreed they saw visible improvements to fine lines and wrinkles.

Get to know the device:

Mode 1: Anti-ageing
The anti-ageing mode has red LED light with a wavelength of 633nm and near-infrared light with a wavelength of 830nm. This mode provides a revitalising experience for your skin. Combined 633nm and 830nm light treatments have been shown to improve the appearance of wrinkles and give a fresher, more youthful appearance.

Mode 2: Target
The Target mode has blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm.

Mode 3: Recovery
The Recovery mode has near-infrared with a wavelength of 830nm.

Mode 4: Balance
The Balance mode is a combination of red LED light with a wavelength of 633nm, blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm. This mode is ideal for an overall boost for the skin. It also has the highest amount of light energy of all 4 modes.


What’s in the box?

• 1 x Wavelength LED Face Mask
• 1 x USB-C cable
• 2 x silicone eye comfort pads
• 2 x adjustable mask straps

Charging:

• Insert the USB-C cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging. Please note charging time is 4:30 hours for up to 6 uses
• If the controller fails to charge or turn on, a reset is required. Press and hold both buttons for 20 seconds and then immediately begin charging the device, the battery icon should appear. Repeat if unsuccessful

How to assemble:

• Remove all parts of the LED Face Mask from the packaging. This includes the remote, eye comfort pads, black straps, and LED Face Mask
• Place the eye comfort pads into the eye holes and ensure they are securely attached. See ‘R’ for right and ‘L’ for left on the eye comfort pads
• Attach the straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward and secure to the crown of your head
• Plug the wire attached to the LED Face Mask into the top of the remote. The LED Face Mask will not work if the remote is not plugged into the mask

How to use:

• Once your LED Face Mask is fully assembled, place the LED Face Mask onto your face and securely attach the straps around the crown of your head
• Long press the On/Off button on the remote. This will turn on to the 'Anti-ageing' mode
• Short press the Mode button to switch to the 'Target' mode
• Short press the Mode button to switch to the 'Recovery' mode
• Short press the Mode button to switch to the 'Balance' mode
• Once you have chosen your preferred Mode, enjoy a 10-minute session.
• To turn off your LED Face Mask before you have completed your 10-minute session, long press the On/Off button